6' Rotary Mower
Trackless Vehicles
The Trackless front mounted 6' rotary mower is designed for close trimming on both sides with a full width rear discharge. Four large gauge wheels and flexible attaching frame allow accurate cutting on rolling ground. Due to the MT7’s hydrostatic transmission, maximum speed of cutting can be maintained in various cutting conditions by simply easing up on the foot pedal in heavier grass or depressing the pedal further for a faster ground speed where grass is shorter. Articulated steering gives the operator precise control for trimming.
DOWNLOAD LITERATURE ↓
| Deck | 72" (1828mm) x 3/16" plate, rear discharge |
| Spindles | 3 - 7 x Timken bearings, greaseable |
| Blades | 3 - 7 x 25" x 2½" x ¼" high lift |
| Casters | 4 - 10 swivel with 4" x 10" pneumatic tires |
| Drive | PTO to right angle gear box, 2 V-belts |
| Cutting heights | 1½" to 4" in ½" increments |
| Cutting tip speed | 18,500 f.p.m. @ 2,200 engine r.p.m. |
| Wings | 24" (609mm) or 48" (1219mm) |
| Caster | 1 x 4" x 10" pneumatic on 24" wing; 3 on 48" wing |
| Roller | 1 gauge on 24" wing only |
| Lift cylinder | Hydraulic x 2" x 8" |
| Hinge | Compound - 110° ARC |
Call for pricing
